26
2-7 Adjusting Track Tension
2. Start-Up Guide
Track tension may need to be adjusted after several hours of use.
Follow the instructions below for each track. Ratchet and 12-point socket are provided.
1. Use a 12-point socket and a ratchet to loosen the 12-point front-end retainer bolt.
The track cover is hidden from view for clarity.
12-point Front-End Retainer Bolt
Hex Track Adjuster
2. Next use a 7/16” hex socket and ratchet to rotate the hex track adjuster.
For the
left side
track rotate the hex track adjuster Clockwise.
For the
right side
track rotate the hex track adjuster Counter Clockwise.
As you rotate the hex track adjuster you will hear and feel a click when it gets
to the next tightest setting. When the track is adjusted properly you should
have no more than 3/4” of play at the center of the track.
Do not over tighten the tracks.
3/4” Up and Down Play at Center of Track
Ratchet and 12-point socket
