ABX Pentra 80 RAB108BA, User Manual, Page: 146 / 306

Pentra 80
4–54
Pentra 80 - User Manual - RAB108EA
6.2.2. Association grid keys
Tab. 4–12: Association function Keys
6.2.3. Results/orders matching
This screen will allow the user to manually match Sample tubes and Worklist Orders that have
been classified as «Exceptions» (see
1.7. Exception management, page 4-11).
Select a result ( in the lower half of the association grid ) that you want to associate an order
with.
Now select the order ( in the upper half of the association grid ) to associate to the selected
result.
Then select the «OK» key. A confirmation message will be displayed (see Fig. 4–45, page 4-
54)
Fig. 4–45 Matching confirmation
Once the matching has be performed, the selected lines will disappear. The matched results
will be added to the «Result» grid (see
6.1.3. Result Grid information, page 4-48).
A notification is added to the instrument logs.
◆ If the order type is different from the results one, the results will be recomputed
(with the new type settings: thresholds, limits....). The recomputed results will
be flagged in the «Remarks» flags (see
5.2. Result screen, page 4-27).
◆ If the order test differs from the results test, then the test of the matched results
= CBC
◆ When the user validates the association and no order is selected, the following
message will be displayed: «
Do you still want to match the tube with its default
order? ».
Heading / Key Name Function
Delete
Deletes selected order of the Worklist: a confirmation
message is displayed «
Do you want to delete the order
which sample ID is XXX »
OK
Associates the selected order with the selected results
(see
6.2.3. Results/orders matching, page 4-54). A
notification is done in the logs.
Click a line Click a line
On the result list:
- Displays the Rack and position of the tube; displays
the running date too.
- Allows to match the tube with its default order (if no
order is selected)