[12]
wAppLoxx Pro oval
–
installation instructions
Logging the wAppLoxx Pro Cylinder into and out of the wAppLoxx
Control
Logging a wAppLoxx Pro Cylinder in:
Create a new wAppLoxx Cylinder via the wAppLoxx
Control Pro user interface and click on “Register”
–
for more information, please see the user guide of the wAppLoxx Control Pro. Now hold the
wAppLoxx Pro System Card in front of the cylinder to be registered.
Logging a wAppLoxx Pro Cylinder out
In order to log a cylinder out of the WLX Pro system, proceed as follows.
Hold the wAppLoxx Pro System Card in front of the
cylinder to be logged out.
10 x red
A flashing red signal will come on.
While this flashing red signal is on, you must hold the
WLX Pro Reset Card in front of the cylinder to be
deregistered.
