27
Connect camera via PoE
The PoE network video recorders TVVR36401 and TVVR36801 have integrated PoE
ports via which ABUS network cameras can be connected directly. (See compatibility
list).
Please connect the individual cameras to the PoE ports step by step and wait until
the respective camera has the status "ONLINE" and an image can be seen.
Attention:
The automatic addition via PoE port only works properly if the camera is set to factory
inactive. The NVR automatically activates the camera with the default IP camera
password. If the camera has already been activated before, the correct password
must be entered in the NVR afterwards.
The cameras are automatically assigned a fixed IP address by the NVR.
The web interfaces of the cameras connected to the PoE port can also be opened via
the web interface of the NVR. (Configuration / System / Camera Management).
Use standard
port
Use standard port (8000)
(was assigned during initial setup in the setup wizard)
Check
certificate
The certificate is a form of identification for the camera that allows
for more secure camera authentication. When using this function,
the IP camera certificate must first be imported into the NVR (see
Network Settings).