4. Physical descriptions
DC:
Only use the 12v DC power supply included with the monitor.
HDMI:
High-Definition Multimedia Interface connections.
HD Analogue 1 IN:
BNC connections support CVBS/CVI/TVI/AHD.
HD Analogue 1 OUT:
Video loop though output.
HD Analogue 2 IN:
BNC connections support CVBS/CVI/TVI/AHD.
HD Analogue 2 OUT:
Video loop though output.
HOW TO CONNECT YOUR MONITOR
1.
Connecting using HDA - Analogue HD Video
Connect your video cable with a BNC connector to the HDA1/HDA2
connector on the rear of the monitor, and the other end to your
Camera .
Connect power to the monitor and video source, and switch on.
Using the SOURCE button, press repeatedly until either
‘HDA1/HDA2’ (depending on the connection used) is on the
display at the top of the monitor's screen.
2.
Connecting using HDMI
Connect one end of a HDMI cable to the HDMI connector on the
rear of the monitor, and the other to the HDMI out connector on the
PC/DVR. This connection will support both video transmission.
Connect power to the monitor and video source, and switch on.
Using the SOURCE button, press repeatedly until ‘HDMI’ is on the
display at the top of the monitor's screen.