Abus SECURITY-CENTER ECOLINE TV7090, Installation Instructions Manual, Page: 39 / 96

15
GO PRESET
The
GO PRESET
button is used to direct the speed dome camera to a prior stored preset position. To
call a preset position follow the steps given below:
1. Step: Choose a speed dome camera in which you want to programm a preset position, e.g. camera 1:
Key in:
0 0 1 ENTER
The keyboards LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡
_ : 001 DEVICE
2. Step: Key in the desired preset position number, e.g. number 1
Key in:
0 0 1 GO PRESET
The keyboards LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡
_ : 001 DEVICE
The speed dome camera will automatically be directed to the selected position
NOTE: To change the current position you can either:
a) select a different preset position as explained above
b) select a different position using the joystick
AUTO PAN
The auto pan mode enables the user to group 32 prior programmed preset positions in up to 4 groups.
Once activated the auto pan function, the dome recalls automatically the preprogrammed preset positions.
Use the OSD of the keyboard to arrange preset position into auto pan groups.
NOTE: By factory default the speed dome offers 2 additional groups which settings cannot be changed
group 5 – continuous panning within preset positions 1,2 and 3.
group 6 – continuous panning within preset positions 4,5 and 6.
To activate an auto pan group please proceed as follows:
1. Step: Choose a speed dome camera in which you want to programm an auto pan group, e.g. camera 1:
Key in:
0 0 1 ENTER
The keyboard’s LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡
_ : 001 DEVICE
2. Step: Key in the desired auto pan group, e.g. number 1
Key
in:
0 0 1 AUTO PAN
The keyboard’s LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡
1 : GROUP AUTOPAN
: 001 DEVICE
The
AUTO PAN
LED is lid.