35
SYS INFO SETTINGS
SOFT ADDRESS
1
SOFT ADDR ACT
OFF
SOFT BAUD
2400
SOFT BAUD ACT
OFF
BROADCAST ADDR
ON
PELCO CHECKSUM
ON
SYS TIME
BACK
EXIT
Function
Description
SOFT ADRESS
(1-255): Dome ID for using control via the RS-485 protocol.
Alternatively, the ID can be set using DIP switches.
SOFT ADDR ACT
OFF: Deactivation of the software dome ID
ON: Activation of the software dome ID
SOFT BAUD
(2400-19200): Baud rate setting for the RS-485 interface.
Alternatively the baud rate can be set using DIP switches.
SOFT BAUD ACT
OFF: Deactivation of the baud rate setting via OSD
ON: Activation of the baud rate setting via OSD
BROADCAST ADDR
ON: If the control unit has the ID 0 all cameras connected to the
bus can be controlled.
OFF: Function deactivated
PELCO CHECKSUM
Only applies if the Pelco D/P protocol is being used.
ON: Checksum test following each control command
OFF: Test deactivated
SYS TIME
Settings for date and time
