29
7. Key combinations
This high-speed motorised dome supports three control protocols: Pelco D, Pelco P.
These protocols are supported by many recorders (such as HDCC9XXXX) and controllers,
allowing them to control the high-speed motorised dome.
The factory setting of the camera is Pelco D/P (automatic detection) with 2400 bps (bits per
second) set. The following information explains how to control the camera using the control
panel TVAC26000. Operation with other control units that use the Pelco D/P protocol is
possible, but the keys may have different names.
Preset
Function
33
Auto Flip
97
Start random scan
34
Pan Zero
98
Start image scan
35
Tour 1
99
Start pan scan
36
Tour 2
100
Start tilt scan
37
Tour 3
101
Start panorama scan
38
Tour 4
102
Tour 5
39
IR cut filter On
103
Tour 6
40
IR cut filter Off
104
Tour 7
41
Pattern 1
105
Tour 8
42 Pattern
2
43 Pattern
3
44 Pattern
4
92
Turn on the limit
settings
93
Set the limit settings
94 Reboot
95 OSD
menu
96 Stop
scan
