10
8. Reconnect the sirens and ensure that the microphone is seated
correctly. Replace the rear housing panel together with the front
cover.
9. Reinsert the plug for the speaker and the plug for the battery
compartment (2). Fasten the rear panel with the four housing
screws (1).
10. Hook the housing onto the wall mounting plate and reconnect the
ribbon cable. Ensure that no cables within the housing are pinched
and bolt the housing onto the wall mounting plate.
Programming
To complete the programming for the centre, please follow the
Installation and User Guide.
If the GSM module was detected by the centre, a display appears in
the Secvest user menu under “System Options
Æ
About Comms”:
“Comms: PSTN, GSM”.
In addition, the IMEI number of the GSM module, the current signal
strength, the GSM network name and the phone number of the SIM
card are displayed. The phone number of the SIM card is only
displayed if your service provider has stored the number on the card.
If the signal is too weak, the alarm centre should be moved to a
different location or you should switch to a different service provider.
