25
can now change this number by pressing the button. A partition is active
when a is displayed. A
indicates an inactive partition.
When the desired value is reached, press the button and keep it pressed
until
appears on the display. If you release the button, the second
partition is shown with
and you can continue input.
The 3rd partition is shown with
, and the 4th with
.
Program all 4 partitions in this way.
Important!
Set only those partitions to active ( ) for which the user (code) is
authorised.
For information on assigning partitions to users, see the user menu of your
secvest. 868 wireless alarm system under User
Æ
Edit User
Æ
Partition.
(Make sure you program the partitions that you have assigned to the user
at the wireless alarm system with the corresponding code.)
Important:
Note that if you want to activate several partitions, you have to assign the
same types and delay times to the partitions, when you program your
secvest. 868 wireless alarm system.
8.3. Training and removing the wireless key switch
The wireless key switch is trained as a normal wireless operating panel for
the wireless alarm system. You also have to carry out the operating steps
for training a wireless alarm system for an Info module.
