Abus eytron TV8901, Installation Manual

Page: 71 / 175

26
EXTERNAL DEVICE
Move the cursor using the direction keys
▲▼ .
Confirm your selection with Enter
«
(3) to open
another submenu.
To exit this menu item, press the menu key (15).
TCP/IP SETUP
Move the cursor using the direction keys
▲▼ .
Confirm your selection with Enter
«
(3) to open
another submenu.
IP SETUP
Move the cursor using the direction keys
▲▼ .
Confirm your selection with Enter
«
(3).
Use the – and + keys to change the values of the
selected menu item.
To exit a menu item, press the menu key (15).
Here you can make settings for the TCP/IP protocol.
You can define this data automatically (DHCP AUTOMATIC) or manually (DHCP MANUAL),
depending on the network connection.
To define data manually, use the + or – keys to enter the IP address, the SUBNET MASK,
the IP PORT and the GATEWAY.
DHCP SETUP:
Here you can make the TCP/IP setting automatically or manually.
Press Enter
«
(3) to change the DHCP mode.
CONNECTION SETUP:
Under TIMEOUT, you can set the maximum time required for connecting to the PC.
Define the number of connection attempts under RETRY COUNT.
Use the direction keys
▲▼
to change the cursor position and the + and – keys to change the
values of the selected item.
EXTERNAL DEVICE
TCP / IP SETUP
RS232C SETUP
PANTILT SETUP
SELECT MENU :
▲▼
, & [ENTER]
TCP / IP SETUP
IP CONFIG SETUP
DDNS SETUP
CONNECTION SETUP
DHCP SETUP MANUEL
SELECT MENU :
▲▼
, & [ENTER]
IP SETUP
MAC ADRESS 00-0A-A2-05-01-
B7
IP ADDRESS 192.168.001.105
IP PORT 05000
GATEWAY 000.000.000.000
SUBNET MASK 255.255.255.000
DHCP SETUP MANUEL
SELECT MENU :
▲▼
, & [ENTER]