Abus Eytron TV8510, User Manual

Page: 33 / 96

33
8.3 Motion setup
8.3.1 SET MD AREA
The motion detection area is split up into 16 x 12 cells. Cells which are marked to detect
motion are displayed red.
In order to navigate use the buttons and confirm by pressing the button.
Press the playback button in order to change the editing mode.
Editing modes:
CELL EDIT Here you can (de-) activate every single cell.
DEL BLOCK Here you can deactivate a complete block of cells.
DEL ALL Here you can deactivate all cells at once.
ADD BLOCK Here you can activate a complete block of cells.
ADD ALL Here you can activate all cells at once.
8.3.1 SET MD SENSITIVITY
Here you can set the sensitivity of motion detection.
MD ENERGY Shows the current recognized motion.
MD THRESHOLD By pressing the buttons or you can set the value when
motion detection is triggered. The lower the value is set the more
sensitive motion detection reacts.
MD AREA
MODE CELL EDIT
MODE CHANGE : PLAY