German
4. Assembly / Installation
ATTENTION!
During installation, the camera must be disconnected from the mains voltage.
4.1.
PPDF17000 - Monitor
Fold out the stand and lock it by pushing the stand upwards. Then connect the included 12V DC / 1A
power adapter. Turn on the monitor with the power switch and follow the monitor's instructions to
complete the initial setup. Then connect the antenna to the monitor.
4.2.
PPDF17000 - Camera PPDF17520
First check the signal strength at your location. Hold the camera (with the antenna screwed on) as
precisely as possible at the desired location: Does the monitor show a smooth live image at the
desired location? If this is the case, you can continue with the installation. Otherwise, reposition the
camera or monitor until a smooth live image is obtained.
Option 1: Power supply flush-mounted
1.
To start the installation, use the drilling template or unscrew the bracket to mark the required 3
drill holes with its wall plate at the desired location of the camera. Drill the 3 holes and insert the
enclosed dowels.
