Abtus MAX-HDMI44P, User'S Operation Manual

Page: 9 / 20

*Specifi cations are subject to changes without notice.
9
SYSTEM OPERATIONS
EDID Management
8×8 HDMI Matrix Switcher provides with convenient EDID management to create effective communication
between the display and sources.
In factory default status (Status: 0000) 8×8 HDMI Matrix Switcher pass through the signals directly, input
& output device process the signal automatically. You can invoke other saved EDID data by adjusting the
4-pin EDID DIP switcher or sending corresponding RS232 command.
VIA RS232 commands
Dial the switcher to “1111” to enable software EDID management.
→
Invokeing embedded EDID data:
Send command “
EDID[X]B[y]
.” to enable to enable input to invoke embedded EDID data of 8×8 HDMI
Matrix Switcher. For example, send “
EDID[4]B[3]
”, the INPUT device (4) will gain embedded EDID data
is that 720P 2D 2CH.
→
EDID copy:
Send command “ EDIDM[X]B[y].” to enable input to copy the EDID data of a dsiplay. For example, send
“EDIDM[1]B[5]” , the INPUT device (1) will gain EDID data from OUTPUT device (5)