Abtus MAX-HDBT44/P, User'S Operation Manual

Page: 4 / 28

User Operation Guide
4
*Specifications are subject to changes without notice.
HDBASET RECEIVER
Note: Pictures shown in this manual are for reference only
1 2
1 2 3
Front Panel
Rear Panel
No. Name Description
1 HDMI OUT Connect to HDMI display.
2 IR IN Plug in the IR receiver, this will receive the IR signals from the display and send
through to the Matrix Switcher and then control the desired source.
3 IR OUT Plug in the IR emitter and attached to the fornt of the display, this will send the
IR signals form the Matrix Switcher to control the display which is connected to
the HDMI OUT port.
No. Name Description
1 Power Indicator
OFF
: No power;
RED : DC power present (PoC).
2 HDBT IN The RJ45 socket has two LED status indicators. Plug in the Preinstalled
CAT cable in to the HDBT RJ45 socket.
HDCP: HDCP compliant indicator
● OFF: No HDMI traffic (no picture)
● GREEN: Signals with HDCP.
● Blinking GREEN: Signal without HDCP
LINK: HDBT Link status indicator.
● OFF: No Link
● YELLOW:Link Successful
● Blinking YELLOW: Link Error
HDBT-HD11RP
HDBT-HD11RP