Abtus ABT-7100, Instruction Manual, Page: 17 / 27

ABT 7100
– Issue 02
17
10.0 Step by Step Guide to Recording Geometry Measurements
on Track
Step 1 Setting New Geometry Profiles
Open TGMD software on the windows tablet and click “ Geometry Profiles ” to set the tolerance
parameters (Figure 17).
You can create a new profile by clicking on the “ Create New Profile ”, which will open the window shown
in Figure 18 . Enter the required details and click “ OK ” to create the new geometry profile.
Figure 18 Creating new profile
Figure 17 Chaining Geometry Profile