PAGE 36
ABTRONIC™NARL™ USER MANUAL
LEDs light up,
but nothing
occurs
Intensity set to
low level
Worn or dirty
gel pads.
ABTRONIC™
NARL™
is
positioned
Incorrectly
gel pads are
worn or have
oil deposits.
Battery is low
Increase intensity
by pushing the up
button
Make sure the
gel pads are still
adhesive
Otherwise use
new gel pads.
Move the
ABTRONIC™ NARL™
around to locate
your trigger
points. (switch off
when moving)
Replace gel pads.
Charge Battery
LEDs light
up, but all
buttons do
not work
Microprocessor
hang up
Battery is low
Press and hold
the on/off button
to switch the unit
off and on again.
Change Battery
IMPORTANT: POWER RESET
If the unit does not switch on, or if you can’t change
to different programs, the microprocessor may have
“hanged”. Please perform a simple
RESET
by switching
the unit off and on again.