(Abstracta Agile with
brackets and monitor/TV
mounted)
Abstracta Agile Monitor Bracket
Bruksanvisning / User Instructions ver 1.0
A
Including components
Page 1 of 3
Abstracta
technical support,
tel.+46472269600.
X
= your measured distance!
Y
= 200, 300, 400 mm.....?
Z
= Your wanted gap! (Min. 12 mm)
(56 mm)
H1
= X + Z + 56 mm
3. Decide your gap
"Z"
(between
your monitor/TV top and inside of
the top frame of Abstracta Agile).
H2
= H1 + Y
Mount centered or more to the left side!
Mount centered or more
to the right side!
Align edges!
Align
edges!
4. Calculate
"H1"
and mark out this with a straight, perpendicular line. Place
the top Monitor Bracket to your line, like the picture shows (don´t screw).
Mark out four of the bracket holes to the mounting board with a pencil.
Calculate
"H2"
and mark out in the same way for the bottom bracket. Use a
sharp tipped tool to punch deeper center marks for easier screwing!
Backside of your monitor/TV
1. Mount the Monitor Brackets.
(Positions in next step)
4
5
Monitor Bracket (2 pcs)
Wall Bracket (2 pcs)
Screw M6 (4 pcs)
Screw (8 pcs)
Washer (4 pcs)
3
1
1
3
5
2. Measure and note
"X"
and
"Y"
for your monitor/TV.
Monitor/TV top
Inside of frame
Your Monitor/TV
1
2
Draw the
lines here!
Mark center of holes here!
9
0
°
90
°
