(4) BRIGHT
It is for setting brightness.
(5) CONTRAST
It is for setting contrast.
(6) COLOR
It is for setting color.
(7) TINT
It is for setting tint.
2) SOUND SETTING
(1) RADIO L/D
It is for switching between LOC and DX.
(2) STEREO
It is for switching between MONO and STEREO.
(3) SWF VOL
It is for setting SWF volume.
(4) SWF FREQ
It is for setting SWF frequency.
(5) LOUDNESS
It is for setting LOUDNESS mode.
(6) SOUND EFFECT
It is for setting EQ mode.
(7) TREBLE
It is for setting the value of treble .
(8) BASS
It is for setting the value of bass.
(9) FADE/BAL
After entering the sub-item, it displays as right:
Touching any place in the rectangle except the
middle column sets the value of the balance;
touching any place in the middle column sets
the value of fade.
(10) TOUCH BEEP
It is for switching touch beep ON or OFF.
Page1 of SOUND
Page2 of SOUND
Page3 of SOUND
FADE/BALANCE
-1 -
3
