Absolute Boilers ABS 1500-2000-2500-3000-4000
17
3.3 Absolute Boiler Specifications:
-
Fully assembled cast aluminum floor standing sectional hot water boilers.
-
Premix burner with stainless steel cylinder with perforated holes for precise air-fuel mixture and velocity with a
stainless tube with woven steel fiber for stable flame and heat insulation.
-
Fully condensing boiler.
-
ASME approved design, CRN design Reg. for each Canadian Province.(where applicable)
-
Precise air to fuel ratio through firing range with high turn down of 10 / 1 is possible.
-
Boiler comes complete with a digital combination flame safe guard and a boiler control, with comprehensive
operating, service and fault diagnostic capabilities.
-
Firing capabilities, fully modulating [4-20MA].
-
Capable of BMS control, 4-20MA
-
Local-remote switch [enable/disable].(optional)
-
Available for conventional chimney, direct vent and sealed combustion venting systems.
-
Fully factory pressure and fire tested.
-
Distinctive powder coated enamel steel,
-
Removable casing, without the use of tools
-
Rigid steel boiler frame with castors for easy of maneuvering into boiler’s final position.
-
Certified by CSA for USA and Canadian markets.
-
High combustion and thermal efficiencies.
-
No minimum temperature requirements
-
Max 160 psi(10.8 bar) – System water operating pressure
-
ASME safety relief valve
-
Pressure & Temperature gauge
- LWCO
-
Lead lag-Cascade (optional)
-
Communication gateway, BACnet and other protocols available (optional)
-
CSD-1
compliant
- Outdoor reset sensor (Optional)
- Flue gas temperature sensor for non metallic vent system (Optional).
Summary of Contents for ABS-1500
Page 6: ......
