14
SECTION 3 OPERATION
Photos of typical LCD 5” control touch screen:
The LCD screen shows the following parameters:
• Selected or Expected power setting %, so you will be able to see
on the screen power selected by the remote control or slider.
• Actual power % & Watt going to an ozone cell.
• The cell voltage V
• Current Amp going to the ozone cell,
• Gas pressure inside the ozone cell
• Temperature inside the ozone cell.
• The LCD screen will allow by touch to switch the generator on
and off and to adjust the desired power by moving the slider on
the screen with your finger.
• In a case when incorrect operating parameters are applied to an
ozone generator the unit is switched off by the control system and
the LCD screen will indicate which of the parameters caused the
generator shutdown.
