Control Ports Configuration
RS232 ports of
NDS-570HD
can be used for signal extension, carrying the signals from the local port to the matching port on remote
unit. The connection cable between unit and the RS232 sender equipment must be assembled with the following configuration:
GND RX
TX
IR CONTROL
IR Input ports of
Absolute HDBaseT®
transmitters can be used for signal extension, carrying the input signal to IR Output port on
remote HDBaseT™ receiver unit. The connection cable between unit and the IR emitter equipment must be assembled with the
following configuration:
RS232 CONTROL
NDS-570HD
www.absoluteacoustics.com
05
Signal
Ground
12V
IR in
Signal
Ground
IR out
