background image

Introduction to your Absima CR6S 2.4 GHz remote control

Thank you for choosing a remote control from Absima. 
You get an absolute high performance product with state-of-the-art functionality. 

Please read the instruction manual carefully before using it for the first time. The basic safety and warning instructions 

are an integral part of these instructions and form the basis for handling the product. In this way, you avoid damage 

that may result from improper use. Keep the operating instructions (printed and/or in PDF format) handy and pass 

them on to the buyer when the product is sold.

Safety instructions and warnings

Operation of remote-controlled models can result in damage to property and personal injury. Liability insurance is 

compulsory in many EU countries. If you are not sure whether your liability insurance covers the operation of 

remote-controlled models, please contact your insurance company. Unauthorized modifications to your Absima 

product are prohibited, as they are dangerous and may cause damage to the device or persons. Only use original 

accessories and spare parts. Again the appeal! Please do not put the device into operation until you have carefully 

read these operating instructions and the following safety instructions.

Remote-controlled models have a considerable hazard potential. The construction and installation of the RC system 

as well as its operation require technical understanding, care and safety-conscious, responsible behaviour. Errors or 

improper use can result in considerable damage and serious injuries. A model that is out of control for any reason 

can cause serious damage to property or personal injury.Moving parts must be smooth-running. 

Cables and connections must not be damaged.

This product is not suitable for children under the age of 14. 

  

If you operate the device in conjunction with products from other manufacturers, check their quality and functionality. 

Each new or changed constellation must be subjected to a careful function and range test before commissioning. 

Do not operate the device or model if its functionality appears to be impaired. Absima assumes no responsibility 

and/or liability for third party products.

Configure a new model with the necessary care and peace of mind. Make sure that the drive of the model cannot start 

unintentionally. Check all functions. Familiarize yourself fully with the operation of the transmitter before putting the 

model into full operation.

Note that rapid temperature changes may cause condensation to form in the transmitter. In general, humidity can 

affect the operation of the transmitter and other components of the remote control system. In the event of moisture 

in electrical appliances, stop operation immediately, disconnect the power supply and allow the appliance to dry out 

(up to a few days) when open. Then carry out a careful function test.

You must always have visual contact with your model. In fog, heavy rain, snowfall and at night you should refrain 

from operating your model.

Never operate your model when you are tired or under the influence of alcohol or medication.

Never leave the remote control in the blazing sun.

Intended use: the CR6S remote control system is intended exclusively for the remote control of models.

We reserve the right to change design, specifications and usage requirements without notice.

Always observe the switch-on and switch-off sequence in order to avoid uncontrolled and dangerous starting of 

the drive!

Switching on / Commissioning: 1. Switch on transmitter / 2. Connect drive battery / 3. Switch on model

Switch off / shut down: 1. Switch off model / 2. Disconnect drive battery / 3. Switch transmitter off 

Please observe these points when operating your model:

• 

Operate model only on suitable surfaces

• 

It is essential to keep sufficient distance from other persons. Do not endanger other persons, 

              animals or objects. Operate your model only in private places or in places specially approved for this purpose.

• 

Do not carry out any risky driving manoeuvres near persons.

• 

Include your own skills and abilities - please do not overestimate yourself.

• 

If there are signs of malfunctions or problems, please stop immediately and stop driving.

Summary of Contents for CR6S

















Reviews: