NOTE:
NUTS AND BOLTS (SUPPLIED) MAY
BE USED IN LIEU OF POP RIVETS
(SUPPLIED) BY SIMPLY ENLARGING THE
HINGE HOLE SETS IN THE CHANNEL AND
JAMB USING A 4.5mm DRILL BIT.
15mm CHANNEL
EDGE TO OUTSIDE
OF DOOR AT TOP
AND BOTTOM.
20mm CHANNEL
EDGE TO OUTSIDE
OF DOOR ON
BOTH SIDES.
NOTE:
USE ALL PRE-PUNCHED
HOLES IN THE CHANNELS AS A
GUIDE FOR DRILLING ALL
HOLES IN THE DOOR SHEET.
DRILL 3mm HOLES TO
CONNECT THE PADBOLT
AND HASP USING SELF
TAPPING SCREWS
(FIT THE HASP AFTER
THE WALLS HAVE
BEEN JOINED TOGETHER)
64B
PPC
64A
58C
58C
12A
FIT HINGES
FIT HINGES AT PRE-PUNCHED
LOCATIONS
FIT DOOR BRACE
SNAP
T TE
i
SNAP
T TE
i
6. DOOR CONNECTION
FIT HINGES
FIT PADBOLT
PART 91A AT
PRE-PUNCHED
LOCATIONS
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: PPCK
22-11-2017
Absco Industries
Pool Pump Cover: PPCK
PAGE 12
