Absco Industries
Assembly Instruction Manual
ABSCO REGENT SHED
MODEL: 23221RK
2.26mW x 2.18mD x 1.96mH
Model: 23221RK
17/03/21
1.1
18
SINGLE DOOR PANEL
NOTE: Nuts and bolts are also
supplied and may be used instead of
rivets. Use a 4mm drill bit to enlarge
these holes in the jamb
NOTE: The holes to fasten the padbolt hasp are not
pre-punched to allow for proper alignment. Position
the hasp centrally over the padbolt shaft and drill 3mm
holes and secure with screws.
91A
91A
DOOR PANEL ASSEMBLY
B