ABSCO SHEDS PPCK, Assembly & Instruction Manual

Page: 12 / 19

Absco Industries Assembly Instruction Manual
ABSCO POOL PUMP COVER
MODEL: PPCK
1.52mW x 1.52mD x 1.49mH
Model: PPCK 1.0 12 27/4/23
FRONT PANEL ASSEMBLY
1. Take the PPF sheet and
orientate with the ‘narrow pan’ to
the left
Place the
94A
jamb with the
wider face on top of the sheet.
Make sure the ends are flush
and fasten with two 10mm self
tapping screws in the two centre
holes only.
90C
79C
PPF
94A
2. Attach the top and bottom
channels using the SNAP-TiTE
method.
The 20mm side of the channel
will fit into the cut-outs in the
94A jamb
Align the hole in the channels
with the end holes in the jamb
and fasten.
3. 94B jamb is fit into the ends
of the channels. Secure with a
longer 20mm self tapping screw
at both ends.
4.
90C
jamb is fit inisde the top of
the doorway, the cutouts in the
ends slot over the side jambs.
20mm side of the
79C channel is
inserted into the bottom channel
and shorter side sits on top.
Fasten through aligned holes in
the channels:
3x 10mm self tapping screws
from outside
2x in the corners from inside.
SN
APT T
E
i
57A
53B
SN
APT T
E
i
94B
94B
3
FAST013
FAST013
- This completes the front panel -
FAST001
x10