DOOR PANEL ASSEMBLY
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: Nuts and bolts (supplied) may be used instead of
pop rivets (supplied) by simply enlarging the hinge hole
sets in the jamb using a 4mm drill bit
PAGE 16
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
91A
91A
A
B
Absco Space Saver Shed
Model: J30082SK
