PAGE 15
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 60303HK 04/07/16
Absco Highlander Shed
Model: 60303HK
INSTRUCTIONS
AND VIDEOS
JOINING RIDGE BEAMS
USING A
HACKSAW, REMOVE ONE
PROTRUDING SECTION OF
EACH RIDGE BEAM.
THIS WILL ALLOW THE TWO
SECTIONS TO BUTT UP
NEATLY TO EACH
OTHER.
DO NOT
CUT OFF THE
PROTRUDING SECTION
AT EACH END OF THE
FULL LENGTH RIDGE BEAM
TEK SCREW DRIVER BIT
QTY. = 1
QTY. = 8
QTY. = 2
QTY. = 1
SELF DRILLING TEK SCREW
RIDGE BEAM SPLICE (PART RBS)
.
.
.
RIDGE BEAM
B
C
A
B
C
A
INSERT THE RIDGE BEAM SPLICE
AT AN EQUAL DISTANCE INTO
EACH RIDGE BEAM. USE A
STRING LINE TO ENSURE THAT
THE BEAM IS STRAIGHT, THEN
SECURE WITH SELF DRILLING
SCREWS AS SHOWN.
(VERY TIGHT FIT, USE A HAMMER
TO TAP INTO POSITION)
SECURE THE CAP
JOINER (PART 98A)
AS SHOWN
5953mm OVERALL LENGTH
A
B
C
