Absco Industries
Assembly Instruction Manual
SKILLION SHED
N3/C1 FRAME KIT
FOR SPACE SAVER AND
Model: CYCSKRSK
02/03/21
1.1
13
REVERSE SKILLION MODELS
BRACING FOR WALLS - DOOR STUDS
Door studs are a single frame member with a cutout that allows the wall bracing to slide inside it.
1. Slide the door stud over the existing front wall channel.
Make sure that it is properly aligned as shown on the right.
2. Fix the stud to the wall bracing with two tek screws as
shown.
NOTE: Instances where the door stud is just short of
touching the roof, At the top box in C0400 to span the gap.
3. Fix the stud to the wall sheet from outside the shed with
tek screws at a 296mm spacing.
4. Fix a multipurpose bracket, BKT17, at the top and bottom
of each door stud using tek screws as shown.
S1785
S1785 has a
rebate so it fits
over the wall
brace.
BKT17 fixed to roof
sheet with 9 hex hd tek
screws with neoprene
washers from outside.
NOTE: For REVERSE
SKILLION models part
S1785 will need to be
trimmed to account for
downward sloping roof.
HEX HD
TEK SCREW W/ NEO
WASHER 10-16x16mm