Absco Industries
Assembly Instruction Manual
ABSCO UTILITY SHED
MODEL: 3060UTK
3.00mW x 5.96mD x 2.10mH
Model: 3060UTK
2/05/2019
1.2
36
STEP 2 of 2.
FRONT FRAME ASSEMBLY
FIT ONE 100mm CHANNEL SECTION (C0100) TO BOX THE BASE
OF EACH OUTSIDE LEG AS SHOWN. THESE WILL LATER BE
USED FOR SECURING THE FRAME TO THE CONCRETE SLAB.
SECURE THE SMALL
TRIANGULAR PLATE TO
THE EXTERIOR SIDE OF
THE FRAME.
SECURE THE RIDGE
PLATE TO THE
INTERIOR SIDE OF
THE FRAME.
40mm ALL SECTIONS
LAYOUT ALL SECTIONS
AS SHOWN IN THE
SAME MANNER AS THE
PORTAL FRAME.
NOTE: IF YOU HAVE AN EDGE REBATE IN YOUR CONCRETE SLAB, YOU WILL HAVE TO CUT AN
AMOUNT OFF THE BOTTOM OF THE FRAME LEGS EQUAL TO THE DEPTH OF THE REBATE.
USE 16mm SELF DRILLING SCREWS JOIN ALL
COMPONENTS TOGETHER WITH THREE SCREWS
AT ALL CONNECTING POINTS ON BOTH SIDES OF
THE FRAME.
325
2300
325
100
NOTE: THESE FRAMES WILL NEED TO BE
TRIMMED 25mm TO FIT REBATE
1750
415
415
415
2045
