Absco Industries
Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 30082SECOK
3.00mW x 0.78mD x 1.80mH, 1.95mH
Model: 30082SECOK
20/09/2023
1.1
17
FRONT PANEL ASSEMBLY (continued)
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: Nuts and bolts (supplied) may be used instead of
pop rivets (supplied) by simply enlarging the hinge hole
sets in the jamb using a 4mm drill bit
91A
91A
A
B
