Absco Industries
Fortess Shed Model: 30081LK-PTX
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19
1
PAGE 01
ABSCO FORTRESS SHED
Model: 30081LK
INSTRUCTIONAL VIDEOS
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
MODEL: 30081LK
11 May 2018
G:\Product Management Files\2-Instructions (Source)\00-Absco - English\04-Fortress Shed
THIS PRODUCT IS DESIGNED FOR INSTALLATION ON, AND ANCHORING TO, A CONCRETE SLAB FOUNDATION.
IT IS RECOMMENDED THAT THE CONCRETE SLAB IS AT LEAST 4” THICK.
TO MINIMISE WATER INGRESS AT THE BASE OF THE STRUCTURE, A 1 3/16” HIGH REBATE IS RECOMMENDED FOR
THE PERIMETER OF THE INSTALLATION AREA - REFER TO PAGE 16 FOR DETAILS
NOTE THAT IF THIS REBATE IS PRESENT, THE FRONT AND REAR FRAMES WILL NEED TO BE CUT DOWN TO SUIT
NOTE: CUTTING FRAME SECTION RESULTS IN A MORE EFFICIENT AND NEATER FINISH TO THE FINAL STRUCTURE,
AS OPPOSED TO CUTTING THE SHEETING/CLADDING
UNDULATIONS IN ANY FOUNDATION WILL LIKELY AFFECT THE ALIGNMENT OF SHEETING/CLADDING, TRIMS
AND FRAME ASSEMBLIES - THE USE OF PACKERS, SHIMS, OR WEDGES IS RECOMMENDED WHERE NECESSARY
IT IS RECOMMENDED THAT ENGINEERING SERVICES ARE ENGAGED FOR FURTHER OR ALTERNATE
FOUNDATION SPECIFICATIONS
9’ 9 13/16” WIDE
2’ 6 7/16” DEEP
7’ 10 1/2” HIGH
