Absco Industries
Bike Shed Model: 23083XK-PTX
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 23083XK-PTX 17/07/19
13
A SINGLE PADBOLT IS TO BE FIXED TO THE
UNDERSIDE OF THE LID. THE MIDDLE OF THE
PADBOLT IS TO BE 1 27/64” TO THE RIGHT OF
THE CENTRELINE OF THE LID.
THE BOLT IS ORIENTATED AS PICTURED. THE
CLOSEST PAIR OF HOLES ARE 3 1/4” FROM
THE EDGE OF THE LID. USING THE PADBOLT
AS A TEMPLATE MARK THE FOUR HOLES AS
SHOWN AND DRILL USING A 15/64” DRILL BIT.
USE FOUR FAST002 BOLTS EACH WITH A
FAST005 NUT TO STANDOFF THE PADBOLT
BEFORE FASTENING WITH ANOTHER NUT AS
PICTURED.
NOTE: THIS BOLT REQUIRES A 13/32” HOLE
TO BE DRILLED INTO THE INSIDE FACE OF
THE TOP CHANNEL OF THE FRONT PANEL.
THIS IS BEST DONE AFTER THE STRUCTURE
HAS HAD ITS FINAL ALIGNMENT AND BEEN
ANCHORED.
1 27/64”
3 1/4”
FAST006
FAST005
FAST002
LID ASSEMBLY
FAST005
