background image

Part number 20217, Rev 0 
 

 

 

TABLE OF CONTENTS 

 

RECEIVING ......................................................................................... 3

 

INSTALLATION ................................................................................... 4

 

NORMAL OPERATION ........................................................................ 6

 

QUICK TROUBLESHOOTING GUIDE ..................................................... 7

 

MAINTENANCE AND CLEANING .......................................................... 9

 

PRODUCT WARRANTY INFORMATION .............................................. 10

 

 

 

BEFORE CALLING THE MANUFACTURER’S TECHNICAL SUPPORT DEPARTMENT, 

please have the 

unit’s model and serial number ready as well as the problem description.  The model and serial 
number is located on the serial tag which can be found on the interior left upper wall of the 
unit. 

For convenience, you may want to record the following information here for easy access in the 
future. 

Model number: __________________________________ 

Serial number: __________________________________ 

Date of delivery: _________________________________ 

 

 

 

Summary of Contents for PH-ABT-UCFS-0220M












Reviews: