EFIS121 User’s Manual Page 7
3. Functionality
The EFIS121 scanner provides to get the fingerprint images using Ethernet interface.
EFISC Scanner control SDK lets have to simple interface to device.
The scanner supports two modes of work
- active mode (scanner works as TCP client)
- passive mode (scanner works as TCP server)
In active mode the scanner waits the finger on the sensor. When the finger is detected,
scanner will try to establish the connection with TCP server. The EFIS121 has TCP
server address in current configuration of device in flash memory. TCP server provides
the connection and takes the fingerprint image for processing.
In passive mode the scanner works as TCP server and waits a connection from TCP
client. If TCP client has the connection from EFIS121 the client application can get the
fingerprint image and control other feature of device by SDK.
WEB access provide us to get fingerprint image using http request .
Configuration for WEB access (use the utility for configuration)
Device mode: WEB access (x) Timeout [30] seconds.
Fingerprint image: Whole image [x]
(Remark: You can set the timeout to 10 or 20. It's time of access to last image of finger.
if you input 0, you can take current fingerprint image only once.)
1. The access to fingerprint image by WEB service
http://192.168.100.168/cgi-bin/getimage.cgi?filename=finger.bmp&tmp=xxxx
where xxx - any number
2. To get the quality of last fingerprint
http://192.168.100.168/cgi-bin/getimage.cgi?quality
3. To get access to homepage
http://192.168.100.168/
or
http://192.168.100.168/index.html
4. Service functions