10
ASSEMBLY
1. Attach the Base Frame ASSY (#2) to the Main Frame (#1) using:
two Fixing Plates (#31)
four M10*130 Socket Head Cap Bolts (#60)
eight Φ11*Φ20*2 Flat Washers (#52)
four M10 Nuts (#57)
2. Adjust the two rear Feet (#28) to ensure the machine sits on the floor stably.
3. Insert Lower Front Shroud (#20) at the top of the Main Frame (#1) by sliding it into
the two grooves on either side of the frame. Be sure that the cut outs for the base as-
sembly are aiming downwards. Slide the Lower Front Shroud (#20) all the way down to
the base of the machine.
Note: Tighten all connections from Step 2.
STEP 2
