8
ATTACHING ENCLOSURE TO FRAME
STEP 1:
Although the bed may be used directly on the
floor, for added stability we recommend placing it on a
bed frame (with or without a box spring) and using the
provided stabilization straps to secure The Safety
Sleeper frame to the bed frame.
STEP 3:
Lay enclosure with roof zippers facing up,
inside base of the frame.
STEP 4:
Lift the top of the enclosure to the outer
side of the frame and wrap the side of the zipper
around the top horizontal bar of frame & zip all
the way across to secure.
STEP 5:
Repeat step three for the other side of
the frame.
9
STEP 2:
Attach frame pad covers to the frame sides so that
the triangle bottom covers the padding and push pins.
TIP
: When zipping the frame pad, hold it 2-3 inches higher
up the pole, and then, once fully zipped, slide them the rest
of the way down over the foam padding and push pins.
Summary of Contents for The Safety Sleeper
Page 15: ...15 ...
