7
ASSEMBLE FRAME TOP
STEP 1:
Lay out four top frame pieces labeled T1, T2, T3, and T4, then connect by pushing in
button & sliding together until button clicks into place.
STEP 2:
Repeat for second top support using pieces with T5, T6, T7, and T8
STEP 3:
Hold the T1-T4 vertically and line it up with the black connector on the outside of the
B3 and B4 joints, making sure support pieces are facing towards the center of the frame and
match the correct jaw slide (S1 to S1, S2 to S2). Line up each connection point so that push pin
can slide through and then flip push pin toggles to secure the top pieces to the base. Secure
the support pieces the same way. Repeat with the other side.
NOTE:
To release the push pins, push the head of the pin, align the toggle (horizontally), &
pull out.
7
Summary of Contents for The Safety Sleeper
Page 15: ...15 ...