9 SERIES R06 FORCE SENSORS
9.1 Overview
The MR06-200 is designed for field pull testing of crimped wire terminals.
Carefully remove the sensor from the box. No assembly is required.
9.2 Instructions
Rotate the upper grip to an appropriately sized slot. Depress the cam shaft
button, located in the tensioning mechanism, and insert the end of the wire
sample in the hole located in the cam shaft. Release the cam shaft button.
Wrap the wire at least one full clockwise turn around the cam shaft. Then
insert the terminal lead in the slot on the upper grip.
Begin to compress and release the handles slowly. Tension force values will
be displayed on the indicator. After the test is complete, remove any debris
from the upper grip assembly, and depress the button on the cam shaft to
remove the wire.
9.3 Specifications
Accuracy:
±0.5% of full scale
Safe overload:
150% of full scale
Operating temperature: 40ºF – 100ºF [5ºC – 38ºC]
Operating humidity:
96% max. (non-condensing)
Weight:
2.5 lb [1.2 kg]
9.4 Dimensions
(in[mm])
9.5 Capacity x Resolution
Model No.
With Model M7I / M5I Indicator
With Model M3I Indicator
lbF
ozF
kgF
N
kN
lbF
kgF
N
MR06-200
200 x 0.1
3200 x 2
100 x 0.05
1000 x 0.5
1 x 0.0005
200 x 0.2
100 x 0.1
1000 x 1
