background image

APC 4000-500 User’s Manual 
Version 1.1

 

 

Limited Warranty 

This product is warranted by manufacturer to be free from defects in material and workmanship for one 
(1) year from the date of purchase unless otherwise stated. 

During this period if this product is found to be defective in material or workmanship, manufacturer or 
one of its authorized service facilities will at its option either repair or replace this product without 
charge, subject to the following conditions, limitations and exclusions: 

1. 

This warranty extends to the original consumer purchaser only and is not assignable or 
transferable. 

2. 

This warranty shall not apply to any product which has been subjected to misuse, abuse, abnormal 
use, negligence, alteration or accident, or has had its serial number altered or removed. 

3. 

This warranty does not apply to any defects or damage directly or indirectly caused by or resulting 
from the use of unauthorized replacement parts and/or service performed by unauthorized 
personnel. 

4. 

This warranty does not apply to the software driver that accompanies this product. 

This warranty is made expressly in lieu of all other warranties, expressed or implied, including but not 
limited to any implied warranty of merchantability of fitness for a particular purpose, and all other 
obligations on the part of Manufacturer provided, however, that if the disclaimer of implied warranties 
is ineffective under applicable law, the duration of any implied warranties arising by operation of law 
shall be limited to one (1) year from the date of purchase or such longer period as may be required by 
applicable law. 

Manufacturer hereby disclaims any and all liabilities for consequential and incidental damages arising 
out of or in connection with any breach of this warranty or any other claim with respect to this product, 
including but not limited to claims of negligence, strict liability in tort or breach of contract. 

Summary of Contents for CardBus WiFiCard

































Reviews: