User Manual
Zia 8.000 series
Zia-8000_9CND_UserManual_5DUCNP20b_EN_v01-01.docx
Page 18 of 32
5.2
Weekly maintenance:
Failing to perform the weekly maintenance negatively affects the quality of the products and
can lead to malfunctioning of the machine.
1.
Open the door of the machine
Clean the mixing system:
2.
Remove the mixing system according to paragraph “
Disassembling the mixing bowl
”.
3.
Rinse out all loose parts of the mixing system in warm water.
4.
Clean the parts of the mixing system that remains in the machine with a wet brush.
5.
Mount the mixing system according to paragraph “
Assembling the mixing bowl
”. Make
sure that the parts are dry before you mount them.
Check if there are still enough ingredients in the canisters.
If necessary, fill up the canisters,
following instructions in paragraph “
Fill
canisters”
.
Clean cycle brewer:
1.
Place a jug underneath the nozzle to collect
the hot water
2.
Press the “Weekly cleaning cycle brewer”
button on the screen.
3.
Follow the instructions in the screen:
a.
Place tablet in brewer.
b.
Install the safety key.
c.
Place 1 litre jug under outlet.
d.
Select the button to run cleaning cycle.
4.
Hot water from the boiler flows through the
brewer
See paragraph “cleaning cycle for coffee
brewer” for detailed information.
Empty waste and drip tray bucket
1.
Open the door.
2.
Remove the drip tray, the cup stand and
the grid.
3.
Rinse the drip trays, cup stand and grid
in warm water.
4.
Remove the waste bucket
5.
Empty the bucket and rinse it in warm
water.
Clean the outside of the machine:
1.
Clean the outside of the machine with a soft damp cloth.
2.
Install the drip trays, grid and cup stand.
3.
Remove the safety key.
4.
Close the door of the machine, and leave the service mode.
