User Manual
Zia 8.000 series
Zia-8000_9CND_UserManual_5DUCNP20b_EN_v01-01.docx
Page 17 of 32
5.
Maintenance and filling:
5.1
Daily maintenance
Failing to perform the daily maintenance negatively affects the quality of the products and
can lead to malfunctioning of the machine.
1.
Open the door of the machine.
2.
Install the safety key (see paragraph: install safety key)
Flush mixers and brewer:
3.
Place a jug underneath the nozzle to
collect the hot water.
4.
Press the “rinse” button on the screen.
Hot water from the boiler flows through
the brewer and mixers.
5.
Repeat step 4 until clean water comes
out of the machine
Check if there are still enough ingredients in the canisters.
If necessary, fill up the canisters
, following instructions in paragraph “
Fill
canisters”
.
Empty waste bucket and drip tray:
1.
Remove the external drip tray, the cup
stand, and the drip grid.
2.
Remove the drip tray under the brewer.
3.
Rinse the drip trays, cup stand and grid
in warm water.
4.
Remove the waste bucket
5.
Empty the bucket and rinse it in warm
water.
Clean the outside of the machine:
1.
Clean the outside of the machine with a soft damp cloth.
2.
Install the drip trays, grid and cup stand.
3.
Remove the safety key.
4.
Close the door of the machine, and leave the service mode.
