EN
15
The Treadmill will
not speed up or
slow down
• Please contact our Customer Service Centre.
The Touch Screen
does not work
• Please contact our Customer Service Centre.
The Treadmill is
losing speed
• Add lubricant oil to the underside of the tread belt as per
instructions on page 8 of this manual.
Touch Screen
is on but the
Treadmill does
not start
• The treadmill has not been started according to the
instructions on pages 7-10 of this manual. If the treadmill still
does not start please contact our Customer Service Centre.
Unreadable /
Incoherent Touch
Screen
• Motor is overheating. Turn the power off, unplug and leave for
one hour then restart. If it does not restart please contact our
Customer Service Centre.
The belt is
running to the left
1. Tighten the bolt clockwise on the left side or loosen bolt on
the right side counter clockwise using the allen key.Start the
WalkSlim 540 to check the new position of the tread belt.
2. If the tread belt is still not in the middle repeat the action until
adjusted to a central middle position.
3. After adjusting the tread belt to the middle, start the WalkSlim
540, set to the maximum speed and observe the tread belt
to ensure that is running smoothly. If it’s not centralised, then
repeat the adjustment steps again.
The belt is
running to the
right
1. Tighten the bolt clockwise on the right side or loosen bolt on
the left side counter clockwise using the Allen Key. Start the
WalkSlim 540 to check the new position of the tread belt.
2. If the tread belt is still not in the middle repeat the action until
adjusted to a central middle position.
3. After adjusting the tread belt to the middle, start the WalkSlim
540, set to the maximum speed and observe the tread belt
to ensure that is running smoothly. If it’s not centralised, then
repeat the adjustment steps again.
The belt is
skidding
• Turn the left and right screw half a turn clockwise at the same
time and then repeat the adjustment until running normally.
Do not tighten the screw excessively.
