EN
14
Error Message Codes
Error
Code
Fault Description
Solution
E01
No communication
when using the
remote control
1. Please contact our Customer Service Centre.
2. Check the batteries on the remote control.
E03
Overvoltage
protection
1. Have a licensed electrician check your mains
voltage.
E04
Overcurrent
protection
1. Check if any mechanical parts are stuck.
2. Check if more Silicone Oil is required. If there is a
lack of oil, the friction between the tread belt and
the tread base will increase.
3. Check the tread base for serious wear.
4. Check the tread belt for serious wear.
E05
Overload
protection
1. Check if any mechanical parts are stuck.
2. Check if more Silicone Oil is required. If there is a
lack of oil, the friction between the tread belt and
the tread base will increase.
3. Check the tread base for serious wear.
4. Check the tread belt for serious wear.
E06
Motor not
connected
Please contact our Customer Service Centre.
E07
Controller receives
no signal
Please contact our Customer Service Centre.
E08
Overload
Protection
Turn the power off, unplug and leave for one hour
then restart. If it does not restart please contact our
Customer Service Centre.
E013
IGBT Short circuit
Please contact our Customer Service Centre.
E014
Load Short
Please contact our Customer Service Centre.
