Chapter 2: About Operation Modes
31
Step 1.
Users would like to set up the WDS function, please go to
Wireless > Basic
page to set up
the mode into
WDS
or
AP+ WDS
(Repeater) mode, and set the APs into the same
Network
Name(SSID)
and
Channel
(If set to WDS mode, the SSID do not need to change). After
setting up, please click
Apply Changes
button to execute.
To use WDS function:
1. The APs must support WDS function.
2. To set the same SSID (Network name).
3. The channel must be set to the same on the APs.
4. To set the same Wireless MAC address (BSSID) on the APs.
5. To set same security (WEP or WPA) on the APs.
Note !
To setup WDS must use the same wireless products (the same model will be
better); due to different wireless products might support different WDS settings.
Thus, it is suggested that to use the same wireless products that support WDS
function.
