Chapter 2: About Operation Modes
20
Connection Type
: Select the connection type
Continuous
,
Connect on
Demand
or
Manual
from the pull-down menu. If selected
Manual
user
can click
Connect
button to make a connection.
Idle Time
: It represents that the device will idle after the minutes you set.
The time must be set between 1~1000 minutes. Default value of idle time is
5 minutes. This function will be available when the
Connection Type
is
selected to
Connect on Demand
.
MTU Size
: MTU(Maximum Transmission Unit, namely the maximum
packet size) for your application. Reducing the packet size can help
connecting to certain web sites or speeding up packet transfer rate. If the
incorrect selection is entered, you may not be able to open certain web
sites.
DNS 1
: Enter the DNS server IP address(es) provided by your ISP, or you
can specify your own preferred DNS server IP address(es).
DNS 2~3:
This servers are optional. You can enter another DNS server’s IP
address as a backup. DNS 2 and 3 servers will be used when the DNS 1
server fails.
PPTP
If the
PPTP
be selected, user have to set up the server IP address, user
name and password according to the ISP that provided the related
information.
IP Address:
Enter the WAN IP address provided by your ISP here.
Subnet Mask:
Enter the subnet mask here.
Server IP Address:
Enter the PPTP Server IP Address in this column.
User Name:
Maximum input is 20 alphanumeric characters (case
sensitive).
