33
Access Policy
Policy
Set access control policy of the stations. Select Disable, Allow or
Reject form the pull-down menu. The policy supports 8 sets MAC for
each SSID.
Add a station Mac
Enter a station MAC in the blank field.
WDS
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet
does. To do this, you must set these APs in the same channel and set MAC address of other APs which
you want to communicate with in the table and then enable the WDS.
Step 1.
Users would like to set up the WDS function, please go to
Wireless Settings> Basic
page to
set the APs into the same
Network Name(SSID)
and
Frequency (Channel)
(If set to Lazy
mode, the SSID do not need to be changed). After setting up, please click
Apply
button to
execute. Please remember the Wireless MAC (BSSID) address here.
To use WDS function:
1.
The APs must support WDS function.
2.
To set the same SSID (Network name).
3.
The channel must be set to the same on the APs.
4.
To set the same Wireless MAC address (BSSID) on the APs.
5.
To set same security (WEP or WPA) on the APs.
Note !
To setup WDS must use the same wireless products (the same model will be better);
due to different wireless products might support different WDS settings. Thus, it is
suggested that to use the same wireless products that support WDS function.
