Abocom MH350 User Manual Download

Page: 132 / 238

Define the required fields of Tunnel Function

To display the VPN connection status via icon

。

Chart --

Meaning

Not be applied Disconnect Connecting

Name:

The VPN name to identify the VPN tunnel definition. The name must be the

only one and cannot be repeated.

Source Subnet:

Displays the Source Subnet.

Destination Subnet:

Displays the Destination Subnet.

IPSec / PPTP:

Displays the Virtual Private Network’s(IPSec Autokey, PPTP Server, PPTP

Client) settings of Tunnel function.

Configure:

Click

Modify

to change the argument of VPN Tunnel; click

Remove

remote the setting.(Figure11-4)

Figure11-4 VPN Tunnel Web UI

132

Summary of Contents for MH350














































































































































































































































Search results

Summary of Contents for MH350

Reviews:

Related manuals for MH350

Brands by name

Popular brands

Abocom MH350, User Manual

Search results

Summary of Contents for MH350

Reviews:

Related manuals for MH350

Brands by name

Popular brands