- 4 -
Step 4
Connect one end of RS-232 cable to any free COM port in your system; Connect
the other end to “Console” port on the rear panel of the ADSL router.
Powering On the ADSL ROUTER
Step 1
Connect the power adapter to your ADSL ROUTER by plugging one end of the
power supply into an appropriate electrical outlet and the other end into port
labeled
5VDC
on the rear panel of the device.
Note: To power off he ADSL ROUTER, just unplug the power supply cable from the ADSL
ROUTER rear panel POWER connector.
Step 2
Once your ADSL ROUTER is powered up, check to make sure the Power LED is
red and ON.
Step 3
If the Power LED is not lit, immediately turn off all power to the ADSL ROUTER.
