- 3 -
Setting Up the Hardware Environment
Connecting All Cables to the Network
Perform the following procedures to set up the ADSL ROUTER.
Step 1
Connect the power adapter to the port labeled
5VDC
on the rear panel of this
device.
Step 2
Connect the Ethernet cable.
One PC – ADSL Router (direct connection)
If your only have
one PC
, you can connect your ADSL ROUTER to the PC directly without
a hub. For a single Ethernet-equipped PC, use the "non-hub" twisted-pair crossover cable to
connect the ADSL ROUTER Ethernet port to the Ethernet port on your computer.
Home Network – ADSL Router (connection through Ethernet Switch/Hub)
If your ADSL ROUTER is connected to a
home network
, you may use a standard Ethernet
cable (not provided) to connect your ADSL ROUTER Ethernet port to an available port on
your home network Ethernet hub.
Step 3
Connect the ADSL cable to the ADSL ROUTER. Connect the ADSL ROUTER to
the ADSL line with the provided telephone cable.
